How to Clean the Hot Tub Filter

The hot tub filter is highly significant in what concerns the proper functioning of the hot tub and therefore, you have to pay special attention to this particular component. Its main purpose is to maintain the water clean and safe and to help the hot tub work properly. Just imagine what could happen if you have a dirty filter and all the dirt, oil, or other impurities would pollute the water. This is why, you have to try your best and keep it clean, so you can enjoy a safe bath for a longer period of time. Although it may seem difficult to clean the filter, once you know how exactly to do it, it will be much simpler. You only need to follow some basic steps that will help you achieve great results very easily.

Remover the Filter

This is the first step you have to take in order to begin your cleaning process. Usually, most filters can be removed from underneath the skimmer, being placed in a hose between two valves. There are some systems that are easier to deal with, while others may require a little more attention, but in general, they are very easily to handle. Also, always make sure that you have previously turned off the hot tub to avoid any unpleasant incidents.

Use a Scrub Brush

In order to clean the filter more efficiently, you will need a soft scrub brush that will allow you to gently get rid of debris, hair, dirt and other particles. The key is to make sure that you don’t brush the filter too hard because you can damage it and you will be forced to buy a new one.

Rinse the Filter

After you have carefully removed the debris, you have to rinse the filter with the help of a filter spray cleaner or a garden hose. This process should be done once every two weeks and every time you change the water in the tub. The best way to do this is to rinse the filter while keeping it at a 45-degree angle and wait until the water runs clear in order to be sure that you clean it properly.

Use Special Cleaning Products

After you thoroughly rinse the filter with water, you can use special cleaning products that will help you remove any possible remaining dirt. These products are specially made to efficiently keep your filter clean and enjoy a safe, clean water every time you take a bath. Also, by using such products, you will also be able to eliminate the calcium that usually accumulates on the filter. However, make sure that you never use detergents or chlorine because they may seriously damage the filter.

Let the Filter Dry

The final step you have to take is to let the filter dry before you put it back in the tub. A great idea would be to place it outside in the sun because the sunlight is considered to have antibacterial properties. After the filter is completely dry, all you have to do is to place it back in the tub and turn it on. Then, you can enjoy a nice warm bath with your family and friends without having to worry about any possible contaminants.

Change the Filter Every Year

No matter how clean the filter is or how often you repeat the cleaning process, you should replace it every year. A worn-out filter won’t be able to work properly, so instead of efficiently drawing all the contaminants, it will become inefficient. Additionally, a damaged filter can also affect the pump of the tub, so a better solution would be to replace it annually if you want to avoid any inconveniences.